An air conditioning system is an essential part of a metropolitan home. If you are living in hotter parts of America, it is a necessity you can’t imagine living without. It is not surprising that more than 87% of American households have some kind of air conditioning.
Now the question of interest would be:
How to Install Air Conditioning Yourself?
Central air conditioning systems are the most popular systems when it comes to convenience and accessibility. If you are a homeowner looking for the convenience of flipping a switch and getting comfortable indoor temperatures, it is your best option to get your air conditioner install yourself. Once you have chosen the central air conditioning system, you have to think about its installation. There are two ways to get it installed, hiring professionals, and doing it on your own (DIY). Both of these options have their pros and cons.
This guide is about how to install central air conditioning yourself. By the end of the article, you will get the challenges and benefits of installing an air conditioner yourself. Let us dive into the installation process without further due.
Steps To Install Air Conditioning Yourself
1. Assess Your Requirements
Prep work is the most important step of installation. If you are going to replace an older unit with an updated energy-efficient unit, the installation process is easier. For those who are looking to install a system for the first time, they have to take care of some renovations for installing ductwork. Make sure you understand all the steps of the installation process.
2. Choose The Location Of Unit
Most of the central conditioning units are installed outside and then connected to the ductwork. Choose a location for the unit that is both safe and accessible. You also need to consider noise production from the unit. Make sure the areas have adequate airflow.
3. Prepare The Location
Once you have chosen the location of the unit, it is time to prepare it. You can either pour a cement pad or install it on the roof. Cement pads are effective in noise reduction and provide a safe position for the unit.
4. Asses The Existing Ductwork
When you are replacing your AC system, it is essential to assess the sealing of existing ductwork. If there are any leaks, your system will not work efficiently. You will have to pay high utility bills as the cold air is leaking. Check the ductwork for any sags or bends.
5. Think About Your Safety
Safety should be a priority for every homeowner as there are some risky steps involved in the process of installing air conditioning by yourself. If you are removing the old unit, you have to recover the remaining refrigerant from it. You need to have an EPA certification to handle the refrigerant. It is possible to achieve that certificate but after proper training, exams, and paying a fee. A lot of homeowners choose professional air conditioning services instead of getting certifications.
6. Connect The System
As you have secured the unit in its place it is now time to connect it with the ductwork. Install the indoor components depending on the configuration of the air conditioning unit. You must always study the instructions manual provided by the manufacturer before attempting DIY installation. Configure the right length of the refrigerant line and make sure it is clean. Connect the thermostat and electrical lines.
7. Run A Test
After you have connected the system run a test. Make sure everything is functioning properly before you settle down. DIY installation requires a lot of hard work.
When To Hire Professionals For Installation
If you are not familiar with the process of taking permits and do not have an EPA certificate, you should always hire a team of trained professionals.
Read more about home improvement by HOME IMPROVEMENT PROFESSOR and upgrade your home.