Table of Contents
Follow These Process to Setup Canon ij Printer on Windows
- In the very first region, you have to cautiously unbox your Printer for performing the Canon Setup procedure. Then, clean the Printer from all the packaging material.
- Now, eliminate all of the plastic tapes from all elements of the Printer with out inflicting any harm to it.
- After that, well deploy the Ink Cartridges and Paper Tray. Then, load the Paper Tray with a stack of specific Paper Sheets.
- Next, you have to vicinity the Printer at a flat, solid surface to carry out the Canon Setup system. Besides that, ensure that it’s far inside your Router’s Signal Range.
- Thereafter, join it to a strong Power Source which includes a Wall Socket. For this, use its Power Cord. Then, transfer it on. After that, activate the Printer. For this, press its Power button. As a end result, its “Power Lamp” need to be nicely lit and strong.
- Along with that, switch on your Router and make certain it is functioning properly.
- Subsequently, turn on your Windows Device. Then, join it to a excessive-velocity Internet Network. At the identical time, make sure that it’s far the identical Network that you will use for Canon Setup.
- Now, insert the “Installation CD” in your Computer’s Disk Drive. Then, click “Run” on the following Autorun window. However, if it doesn’t open up routinely. Then, cast off and reinsert the CD. After that, visit the system’s CD-Drive underneath “My Computer”. Thereafter, open the Setup File by means of double-clicking on it.
- Consequently, Canon Setup will open the preliminary “Printer Setup” window. Hence, click “Next” to proceed further.
- Thereafter, it will take you to the “Connection Method Selection” window. Here, you should click on “Network Connection” for Canon ij Setup.
- After that, click “Wireless Connection” on the following window.
- Subsequently, it will prompt you to turn on your Printer. Hence, ensure the same by checking its “Power Lamp”. It must be stable and lit. However, if it is not lit. Then, press its “Power”/ “ON” button.
- Now, click “Next”.
- Next, a “Printer Setup” window will appear. Here, you should click on the “Connect To The Network” button.
- After that, you will get the “Setup Procedure Selection” window. Here, you will get the options for “WPS” and “Cableless Setup”. The “WPS” method works only if your Router supports “WPS” with a push-button. On the contrary, all standard Routers can connect with the “Cableless Setup” method. However, your choice will also depend upon the time taken by both the methods. “Cableless Setup” method is longer than the “WPS” option of Canon Setup. In addition to that, it will disable your Internet Connection temporarily. Moreover, it doesn’t work for computers with Windows XP OS.
- As such, select the “Cableless Setup” connection and go to your Printer’s Control Panel. Now, press and hold the WiFi button till its “Power Lamp” flashes twice. Then, release it.
- On the following Installation Wizard, click “Next” if you have completed the last step accurately. Alternatively, perform the last step once more by clicking on the “Start Again” tab.
- Consequently, you will notice the Printer’s blue “WiFi Lamp” starts flashing. However, its “Power Lamp” is lit and stable. Hence, click “Next” if that is the case.
- Thereafter, Canon Setup process will begin. It will also disable your Internet Connection for a few minutes. Hence, wait for the process to complete.
- On the next window, appropriately “Select Your Place of Residence”. Then, click “Next”.
- After that, choose your Country appropriately and click “Next”.
- Subsequently, you will get a list of available software for Canon Setup. As such, appropriately select the software for installation. Although, it is recommended to click on “Select All” and install all the software.
- After this, it will inform you about the “disk space” required for Canon Setup. Therefore, notice the same to ensure sufficient space on your system’s “Hard Disk”. Then, click “Next”.
- As a result, it will take you to the “License Agreement” window. Now, carefully read the entire document. Then, click “Yes” to proceed further.
- On the following Firewall Settings window, click “Next”.
- Consequently, it will detect your Canon Printer on the Network and connect to it. However, it may prompt you to “Check Printer Settings” in case if it cannot detect the Printer. As such, establish the connection by clicking on the “Redetect” button. It is quite possible that you may be required to repeat the process for multiple times on account of your network configurations. However, if the Canon Setup continues to fail. Then, check your Printer’s “Network Settings” by performing a Test Print to ensure that it is connected to the correct Network. You may be required to perform this process from the very start.
- Finally, the “Setup Completion” window will appear showcasing your printer’s “Model Number” and “Network’s SSID (Name)”. Hence, check the details and confirm it is correct. Thereafter, click “Complete”.
On the “Print Head Alignment Recommended” window, click “Next”.
- After that, click “Next” on the “Setup Complete” window.
- As a result, it will suggest you for “User Registration”. Therefore, click “Next”. Then, complete the registration process by following on-screen instructions. Else, click “Cancel” if you want to register later.
- Now, you will get the “Extended Survey Program” on the next window. As such, closely review the details. Then, click “Agree” or “Disagree” according to your choice.
- At last, close the Canon Setup Wizard by clicking on the “Exit” tab.
Canon Ij Setup Instruction on MAC
- To begin with, prepare your Canon Printer by performing the Hardware Setup procedure as explained above for Windows Setup.
- Then, power up both the Printer and the Computer. Along with that, connect your Computer to the Network with which you want to configure your Printer.
- Now, insert the Installation CD in your Mac’s CD Drive or download the latest Drivers from Canon’s official Setup Website.
- Next, you should click on the “Run” tab on the following pop-up box. However, in the case of online download, double-click the downloaded Setup file to get this Security Prompt.
- As a result, you will get the Welcome window of the Installer. Hence, click “Next”.
- Thereafter, accurately type in your “Mac Administrator User ID and Password” when prompted.
- After that, click “Next”.
- On the following window, select “Network Connection”.
- Subsequently, select “Wireless Connection” on the next window for Canon Setup.
- In order to proceed further with Canon Setup, ensure that the Printer is turned on. Then, click “Next”.
- On the following pop-up box, click “Open”.
- Then, click the “Connect To The Network” tab.
- Thereafter, click “Cableless Setup” for Canon Setup.
- Subsequently, follow on-screen instructions and enable “Cableless Setup” on your Canon Printer.
- Now, click “Allow” to permit the Canon Setup.
- On the following window, appropriately select “Your Region”. Then, click “Next”.
- Thereafter, you should select software appropriately from the following list of available applications. Else, simply click on “Select All”. Then, click “Next”.
- Next, you will get the “License Agreement” window. Here, you must carefully read the terms and click “Yes”.
- Consequently, it will begin downloading and installing the software.
- Subsequently, follow on-screen prompts to complete the “Add Printer”, “Print Head Alignment Recommended”, “User Registration”, and “Extended Survey Program” procedures.
- At last, click “Exit” to conclude Canon Setup.
Easy Steps to Print From Your Mobile to canon printer without any pre-installed software-
1. you may connect your movable to an operating net affiliation.
2. attend the AppStore or Google play store. hunt for the canon printer app.
3. Click to transfer the app and so install it.
4. currently open the image, document or whichever file you wish to print. this may lead you to the preview of your elect print. Here you may notice varied customization choices to individualize your print.
5. within the same section, you’ve got to click on ‘printer’, this selection will show you an inventory of printers which will be used or are close to you. hunt for the name of your printer and click on on that.
6. If because of one thing you are doing not see the name of your printer, you may manually hunt for your printer and so choose it.
7. you may see a ‘print’ possibility, click on that.
There, you may have your required print.
Ij start cannon may be a method to attach the printer together with your laptop, laptop, etc. employing a USB cable. it’s several sensible options. it’s the flexibility to attach with everything doable like Bluetooth, USB, etc. it’s terribly fascinating in its look with its sleek style. Ij start cannon printer may be a multi-functional printer. it’s excellent speed.
By bobbing up of canon ij printers users forget the cables and wires to attach the printer with the pc. Ij start cannon offers data concerning the way to setup canon ij printer. on our web site, we offer the steps to put in and setup canon ij printer. our team works thus arduous to supply the simplest services and solutions to troubleshoot every kind of problems.