A flexible Teflon hose is a perfect solution for when you need to get in tight spots. It can be used to protect against oil, coolant, water or just about anything else that could harm your equipment. The flexible hose has several benefits over traditional rigid hoses. The material allows it to bend and twist with minimal effort, so you don’t have to worry about kinks or damage from sharp edges. This also makes it easier to coil up at the end of the day when your job is done. When you purchase a flexible Teflon hose, you’ll never have any more problems with leaks either because there are no joints where fluid can escape through cracks.
The main factor to purchase a flexible Teflon hose is the diameter of the drain pipe. It’s essential to know your needs before you go shopping so you can select the proper size. You should measure from the outside edge of one coupling to the outer edge of the next during installation. Here are some common sizes:
Table of Contents
Drain pipes measuring 3/8″ are a typical size for small engines. Whether you’re working on the lawnmower, snow blower, or any other small engine, this Teflon hose will keep your oil and gas where they belong without taking up too much room. 3/8″ flexible hose is ideal for use with hand-held power tools too. You can use it to drain water or another liquid from masonry drills, saws, buffers and more without having to worry about leaks or spills.
3/8″ is also an excellent size for small water mains. Water weighs 62 lbs per cubic foot, so even the smallest pipe will have a serious load to bear. Many pipelines are built from ABS or PVC, which has a minimum pressure rating of 100 psi, so you need to ensure your flexible hose has the same rating. With proper installation, the 3/8″ Teflon hose is also resistant to oil and gasoline, so it can be used on even more equipment.
A 1/2″ drain pipe is the most common size for small to medium jobs. It’s easily capable of handling jobs that are just a bit too big for a 3/8″ hose, yet it’s not so large that you have to worry about taking up your entire garage or shop either. With all the benefits of being made from Teflon, this flexible hose is great for draining water from saws, buffers and masonry drills. Many craftsmen will also use it to drain excess oil or another grease, so they don’t have to worry about a mess when they’re done working. You can even use it in your kitchen sink if you want because the grease prevents clogs.
The most common sizes for flexible Teflon hose are 3/8″, 1/2″, and 3/4″. They’re all great for their own reasons, but some projects require that extra little bit of oomph. For those jobs, nothing beats a 3/4″ drain pipe made from Teflon. You can use it for draining oil or grease from your mower, snow blower, heavy-duty power drill, even your car engine if you want! It’s a high capacity hose that will never let you down regardless of the job at hand, so long as you have enough room to accommodate its size.
Other Things to Consider
Although there are many sizes to choose from, not all Teflon hose is made equal. There’s a lot more that goes into selecting the proper hose than just length and diameter. There are several things you should take into consideration before making your purchase:
1. Working Temperature
You need to consider what type of fluid you’ll be draining and for what temperature. Heat resistance is one of the most significant factors in Teflon hoses. This material is excellent at keeping your fluid where it belongs, but that’s only true within a specific range of temperatures.
Teflon resists most fluids up to 400° Fahrenheit, making it ideal in industrial settings where chemicals are regularly used. Even though 400° Fahrenheit is the limit, most manufacturers recommend that flexible Teflon hoses are never exposed to more than 250°, or they could melt! Luckily, just because Teflon melts at these high temperatures doesn’t mean you need special tools to cut it. You can easily use standard hand saws or even a hacksaw to quickly slice through Teflon hose so long as it hasn’t been heated past 250° Fahrenheit.
2. Chemical Resistance
The other thing you should look for in a hose is chemical resistance. Many fluids will attack the inner lining of your flexible Teflon hose if they get too hot or if they’re overly acidic or alkaline. Just because Teflon is resistant to oil, gasoline, and water doesn’t mean that it’s completely immune to corrosion either.
When installing any type of pipe, whether it’s made from PVC or Teflon, there are a few things you need to be aware of. First and foremost, make sure the pipe is never kinked because this could prevent it from draining fluids properly. The easiest way to avoid this problem is to coil your flexible Teflon hose in a spiral before using it. This will keep your hose from getting bent out of shape and make sure fluids flow smoothly through the entire length of the hose.
So, long as you don’t mind taking a little extra care when using your flexible Teflon hose, there’s no reason why you shouldn’t have one in your toolbox. Since it can be used for many different purposes, everyone from industrialists to home mechanics should have a few feet of this stuff lying around!
Did you have any questions that weren’t answered here? If so, please get in touch with us for all your quality needs – our customer service team is always happy to help!