Having a laser level in your toolkit can make various building projects a breeze. Because of its ability to produce a level line, you won’t need to hold a measuring tool in one hand and the building material in the other.
When you own a handy device from one of the best rotary laser level brands, you don’t need to worry about manually calculating or setting levels. Just turn your rotary laser level on, and it’ll spin a beam of light around the space, giving you a 360-degree vertical or/and horizontal plane.
With how useful this tool is, it also helps if you know how to set it up and operate it. That way, you can optimize the many features of your device.
Setting up the Laser Level
A proper laser level setup can go a long way when it comes to getting accurate levels and finishing the job with zero mistakes. But before you go ahead and set up your laser level, you need to have a compatible tripod and other needed accessories.
If you already have a complete laser level set in hand, then you first have to secure it on the tripod with the use of an adapter. Next, make sure that it is secure enough even if it gets accidentally knocked or moved.
An automatic laser level eliminates the need to level your device manually. Just turn it on, and give it time to self-level.
But if the laser level you’re using is a manual one, you have to adjust the bubble vial. To do this, turn the screws or knobs of it until the bubble aligns with the center of the vial.
After ensuring that your unit is secure and level, you can now turn it on. It will then produce a laser beam onto the surface where it’s facing. Next, you need to adjust the laser level so that its beam is placed on the exact location where you need the level line.
Finding the Laser Beam Outdoors
When working in outdoor areas, it can be difficult to find the laser beam with the naked eye. Typically, laser levels built for outdoor tasks produce green beams instead of red. This is because green lasers are a lot more visible than red ones. Green laser beams can thus work over longer ranges than red beams.
However, a laser level producing green beams alone is not enough for finding the level line in brightly lit outdoor settings. Fortunately, there are laser detectors available for this problem.
A laser detector works by intercepting the beam and beeping multiple times to let you know its precise position. To use this device, you need to have a clamp and a grade rod.
First, secure the laser detector to the clamp. Then, attach the clamp, along with the detector, to the grade rod. After that, slide the laser detector up and down the length of the rod until it makes a beeping sound.
Once it beeps, that means it has found the level. You can then secure the detector in place and take the needed measurements.
Leveling Outdoors
After setting up the laser level on your tripod and the detector on your grade rod, you can then start leveling outdoors.
First, identify the height of your preferred level line. Then, adjust your grade rod and detector toward a point of that height. Slide the detector up and down until it catches the beam and beeps. Next, secure it in place on the rod.
After that, find another point along the level line where the detector intercepts the laser beam. Finally, mark that point with the use of paint or other marking tools. Repeat the steps until you have all of the needed reference points.
Leveling with rotary laser levels is pretty easy once you get the hang of it. Whether it’s for a professional project or a DIY building project, a rotary laser level is a great piece of equipment to have in your toolbox.
Also read: Importance of Key Tracking Device
